 |
12V DC-DC LiFePO4 Lithium-ion Battery RV Charging Controller
Подробная информация о продукте:
| Место происхождения: | Шэньчжэнь |
| Фирменное наименование: | Oxiang /OEM |
| Сертификация: | CE.RoHS,FCC |
| Номер модели: | B2B1290 |
Оплата и доставка Условия:
| Количество мин заказа: | 1 шт. |
|---|---|
| Цена: | Negotiate |
| Упаковывая детали: | Подарочная коробка |
| Время доставки: | Образец: около 3-5 рабочих дней после оплаты |
| Условия оплаты: | Т/Т, Западное соединение, ПайПал, кредитная карта |
| Поставка способности: | 10000 шт/месяц |
|
Подробная информация |
|||
| Совместимость типов батарей: | Свинцово-кислотные, AGM, гель, литиевые | тип: | МПРТ |
|---|---|---|---|
| Выходное напряжение: | 12 В/24 В постоянного тока | Выходная мощность: | 500 Вт |
| Рабочая температура: | от -10°С до 50°С | Напряжение: | 12-50 В |
| Pvmax: | 685w | Сила DC максимальная: | 390 Вт |
| Функция: | Управление через приложение | Холодильник: | 20А |
| Зарядное устройство: | заряжатель солнечной батареи | Розетка стандартная: | ЕС/AU/UK/US |
| Рабочая температура: | -20-50 ℃ | Сертификаты: | CE, РоХС |
| Вольт: | 12 В | ||
| Выделить: | 12V LiFePO4 battery charger,RV DC-DC charging controller,lithium-ion battery charging controller |
||
Характер продукции
INSTALLATION ATTENTION
• Do not expose the DC/DC charge tr o rain or snow.
• Do not use the DC/DC charger if it has received a sharp blow, been dropped,
has cracks or openings in the case, or is damaged in any other way.
• Do not install the charger near a heat source.
• This charger should not be installed in an airtight or poorly ventilated area.
• Do not attempt to open the DC/DC charger. There are no user serviceable parts
except for user replaceable fuses.
• Do not use the DC/DC charger with damaged cables.
• It is strictly forbidden to disassemble the charger and/or modify the housing in
any way.
CONNECTIONS ATTENTION
• It is important to choose the correct battery type, a wrong choice can cause irreversible
damage, The LITHIUM charging cycle is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).
Maintenance
• If necessary, the fuses must be replaced by identical products.
• This charger cannot be disassembled and the electronic board is inaccessible.
• Therefore, with the exception of the fuses, all on-site maintenance is prohibited.
• Disconnect the DC power supply before servicing, cleaning or working on
circuits connected to the DC/DC booster.
• Once disconnected, isolate the battery connection terminals.
• It is important to ensure that the area around the battery is well ventilated.
• It is important to ensure that the battery voltage matches the output voltage
• Always use ungrounded batteries. If necessary, the battery grounding connection
should be made last.
To prevent overheating, make sure the connections are properly tightened
Хотите узнать больше подробностей об этом продукте